China Hot selling High Quality Speed Propeller Producing Design Boats Surface Drive Marine Stern Drive pto shaft end yoke

Product Description

Controllable propellers have been widely used in marine engineering ships, oil tankers, dredgers, official ships, container ships, tugboats, fishing boats and other ships under various working conditions.

Product Parameters

Propeller hub model

Transmission ability(kW/rpm)

Minimum blade diameter(mm)

Maximum blade diameter(mm)

Maximum speed(rpm)

350

1.35

1100

1500

610

400

2.02

1400

1700

480

450

2.88

1500

1950

450

500

3.95

1600

2150

420

550

5.25

1800

2350

370

600

6.82

2000

2600

340

650

8.67

2100

2800

320

700

10.83

2300

3000

290

750

13.32

2500

3250

270

800

16.17

2600

3450

260

850

19.40

2800

3650

240

900

23.02

3000

3900

230

950

27.08

3100

4100

220

1000

31.58

3300

4300

200

1100

42.04

3600

4750

190

1200

54.57

4000

5200

170

1300

73.56

4300

5650

160

1400

91.88

4600

6050

150

1500

113.00

5000

6500

140

 

 

 

Detailed Photos

 

The controllable propeller can be configured into various forms such as single-engine single-propeller, twin-engine double-propeller and twin-engine parallel car according to the type of shafting. The product has high reliability and structure through hydrodynamic calculation, structural design analysis, and material optimization. Simple and easy to maintain. In addition, the controllable propeller system can be configured with multiple types of PTO through the transmission device to drive 1 or more loads (shaft generators, etc.) to meet the supporting requirements of different ship types and functions.

The characteristics of the company’s controllable propeller products:

1. Tailor-made design: Since each ship search has a different line type, our engineers based on the latest hydrodynamic theory and calculation method of tank test results, design the most matching propeller for each ship according to the actual wake field , To ensure the best propeller efficiency while minimizing vibration and noise.

2. Serialization: Use finite element design tools to analyze and optimize the blade and hub mechanism. Three series of controllable propeller hubs have been developed and designed to meet different ship types, and the maximum diameter of the hub can reach 2 meters. 

3. Low pressure stability: Through continuous optimization and improvement of the structure of the controllable pitch propeller, the controllable pitch propeller system produces a lower working oil pressure, which improves the stability and reliability of the blades when adjusting the pitch.
4. Convenient integration: The PLC-based controllable propeller control system has high flexibility and redundancy, and improves convenient visualization and system settings. Users can choose the joystick/DP system according to their needs.
5. The geometry of the blade section: Cooperate with Marin to optimize it, which can effectively reduce cavitation and improve propulsion efficiency.

6. OD box (oil distributor): installed at the front end of the gear box for easy installation, testing and maintenance.
7. Unique security design: In the event of a hydraulic failure, the pitch can be locked in the original position in both the reverse and CZPT positions.
8. Realize the integration of CPP and gearbox hydraulic system: save installation space and reduce installation cost.
 

Company Profile

HangZhou LionHeart Power Equipment Co., Ltd., a subsidiary of 1 of the nation’s top marine services company —- HangZhou Agricultural Machinery Co., Ltd., is a provider of marine equipment worldwide. Our company is committed to providing the best solution to our customer’s project since 1996. With over 20 years of profound experience in the marine services industry, our company has set up a professional and customer-friendly system in our every pre-sales, shipping and after-sales process to ensure your worry-free shopping experience. We ship our brand-new products all over the world, at the best prices on the Web.

LionHeart Power is a professional provider for equipment like marine engines, generators, gearboxes, propellers, marine interior fit-out, deck machinery and related marine spare parts. Our processes and procedures are designed to present the perfect product that will meet or exceed the expectations of every 1 of our customers. We back up that commitment with comprehensive services through the product’s whole life cycle, along with our key technologies and leading product expertise. That is the reason why we stand out as the nation’s marine equipment sales champion of multiple brands for over 10 consecutive years.

LionHeart Power carries 1 of the nation’s largest inventories of marine equipment and related parts from 20+ manufacturers such as Weichai, HangZhou Advance, Deutz, Steyr, Zichai, CZPT and more, among which the CZPT and ADVANCE series are fully covered. Specifically, that inventory is meticulously organized over 57 acres outside and 118, 000 sq. FT. Of warehouse under roof. That means our products are generally in stock for immediate availability. Besides, we are proud of our resource plHangZhou system of products, which is unparalleled in the industry, offering you the shortest lead time and efficient service.

LionHeart Power’s staff is expertly trained not only to quickly locate the products you’re looking for, but also to meet your project requirements with the best solution. If what you are looking for is not ‘on the shelf’, we will customize it for you. This strength builds CZPT our CZPT partnership with various manufacturers and production institutes. Efficiency and service are the goals of every member of our organization. LionHeart Power knows your time is valuable and we produce this value for you. Quality equipment and expertly-trained service technicians, combined with our extensive inventory, give you the edge in your commercial and industrial success.
Quality is our culture all the engines will be tested before leaving the factory We are proud to say that in our years of international trading experience. we never had a single order returned to us, For all our clients, you will receive exactly what you ordered, and you will receive it on time and we live by the principle that customer comes first 

Certifications

 

 

Packaging & Shipping

 

FAQ

 

1.Processing
Orders are usually packed and ready to ship in 1 to 3 business days if the products are in stock. However shipments are subiect to required manufacturing time and customs clearance procedures. which can cause delays beyond original delivery estimates. For detailed delivery information, please contact customer service.
2.Packing Methods
Normally we use wooden boxes for packaging or we can pack it according to your special needs.
3.Shipping Methods
We are happy to offer a variety of shipping methods. Shipping methods available: EXW. FOB.CER. CIF.
4. International Returns & Exchanges
Unfortunately we can’t accept retums on intemational orders. We will test each product before dellverv One-year manufacturer warranty is quaranteed on our complete machines and 3 months on spare parts. I1 you have any concerns with your order, please reach out to customer service
5.Payment Methods
We sugqest 50/50 T/T payment method: 50 percent down payment on placement of the order, with the remaining 50% due CZPT shipment. We also accept L/C, Trade Assurance, Visa transfer and Paypal

 

After-sales Service: 24 Hours Online
Warranty: One Year
Material: Bronze, Copper, Aluminium, Steel, etc.
Blades: 5
Certification: RoHS, ISO9001:2000, CE
Certificate: CCS

Shaft Collar

PTO Shaft Safety Chains

PTO shaft is the part of a tractor that helps transfer power from the tractor to the equipment it is hooked to. A PTO shaft is important if you have a tiller or bush hog. The correct PTO shaft size is crucial for both the tractor and the equipment. If the PTO shaft size is not correct for your equipment, it may not work.
Shaft Collar

Safety chains

<br/Safety chains are an essential part of securing your PTO shaft. They prevent a rotating plastic shield from coming loose and causing injury or damage. It is important to protect your PTO and any other drive shafts on your machine. Watch the video below for more information about the dangers of unguarded PTOs.
PTOs are an efficient way to transfer mechanical power between tractors and implements. They helped revolutionize North American agriculture during the 1930s. Despite their convenience, PTOs have also proven to be one of the most common farm machinery hazards. This fact sheet outlines several important PTO safety precautions.
Safety chains for PTO shafts are necessary to protect both tractor and implement from damage. The PTO shaft must be attached properly to the tractor and the implement before starting the equipment. Before operating, be sure that the safety chains are positioned in a way that allows them to fully move. When operating the PTO, avoid being too aggressive as this can damage the drive line and shaft. For further safety, make sure to fit a torque limiter or clutch on the implement end of the PTO shaft.
PTOs are great for plowing, mowing, and shredding, but they also have potential to cause injuries if you don’t use a safety chain. It’s best to get a chain that is long enough to prevent injuries. Also, be sure that the PTO shaft does not compress completely at any point during the operating range. There should be several inches of overlap in the longest operating extension of the PTO.
Another common hazard with PTOs is IID shafts. While many machines and tractors have driveline guards, these are often missing. If you have a PTO with an IID, you should consider installing a safety chain.

Shield

A swingable tractor PTO shaft shield assembly consists of an inverted U-shaped shield member slidably attached to a bracket. It extends above the PTO shaft and has several notches and pins that engage each other. It can be held in a number of positions and can be retracted when not in use. It also includes a cover member that covers the space between the shield and tractor and abuts the raised portion of the shield member.
The PTO shaft shield is typically made of plastic, but it can also be made of metal. Plastic is less likely to break or damage than metal. The shield is supported by a bracket 51 with a curved distal end 57 and a non-metallic guard 59. When used in conjunction with a bracket, a PTO shaft shield should be properly installed to prevent damage to the shaft.
Keeping the PTO shaft shield in good condition is crucial to the safety of your tractor and your workers. An improperly installed PTO shaft shield can result in severe injuries. It may also ensnare or strike people in the vicinity. Proper maintenance will prevent many of these injuries. Equipment manufacturers have made great strides in reducing the risks of PTO mishaps. Operators are also responsible for keeping the shields in good condition. Removing the guards will only increase the risk to the operator.
A PTO shaft shield is a tubular assembly that is mounted on the tractor PTO shaft. It consists of two telescopic pieces that are held in place by shield support bearings. This shield protects the PTO shaft and the universal joints from debris and prevents premature wear. The shield can be easily removed and replaced if necessary.
Shaft Collar

IID shaft guard

The IID shaft guard is a safety device used to protect PTO powered machinery from the possibility of separating while in use. The shaft, which is a telescoping shaft, is attached to the PTO stub on tractors. The telescopic feature is convenient when moving across uneven ground. However, this type of shaft can cause serious injury if it separates while in use.
The IID shaft guard can prevent these injuries by completely covering the shaft. The guard is made of metal or plastic and rotates along with the shaft. A person can react in less than five tenths of a second, making the IID shaft guard an important part of PTO safety.
PTO shafts rotate at speeds as high as 540 rpm, which is very fast. A limb could be wrapped around the driveline shaft, causing a serious injury or death. Because of the speed of a PTO, it can be difficult for an individual to discern whether it is engaged or not and may not be aware of the danger.
An IID shaft guard should be fitted to every tractor PTO shaft. It should be tested and rotated regularly. It is also important to keep the tractor engine off when working around the PTO shaft. Using a drawbar to protect driveline components is also important. It will prevent stress on the driveline and reduce the possibility of separation.

Overrunning clutch

An overrunning clutch on a PTO shaft is a mechanism that allows the PTO shaft to rotate freely in one direction while restricting the speed of the implement being hauled behind the tractor. This clutch is also useful for preventing the speed of the implement from exceeding the speed of the tractor while slowing down. It comes in two basic configurations, one for a clockwise and the other for a counter-clockwise direction.
Another type of overrun clutch is used on tractors with a PTO driven bush hog. A bush hog has a flywheel and blades that drive the transmission through the PTO shaft. Without an overrunning clutch, these implements would freewheel while the tractor is driving and would potentially break the shaft.
A PTO overrunning clutch prevents power from backfeeding into the transmission, the part that transmits power to the rear wheels. Without an overrunning clutch, the tractor could backfeed power, causing an accident if the blade assembly hits an object. As such, it is essential to use the overrunning clutch to ensure that your tractor will be safe.

Direction of rotation

Despite its name, the direction of rotation of a PTO shaft can change if necessary. Most PTOs have a single-direction rotation, but you can often reverse the direction by installing a reverse PTO adapter. However, you should only use reverse PTOs when absolutely necessary.
A standard PTO rotation direction has been defined by the International Organization for Standardization (ISO). It is considered necessary to adhere to this standard, as improper rotation can cause damage to implements attached to a PTO. This standard helps farmers avoid problems such as ruined implements. While the direction of rotation of a PTO shaft is not always the same for all PTOs, there are some tractors that allow it to rotate both ways, while others have no restrictions.
The direction of rotation of a PTO shaft can be changed by using a hydraulic pump. Another way to connect a PTO is through a “sandwich” type split shaft unit. These units are mounted between the transmission and engine, and they usually receive drive directly from the engine shaft. They can also deliver complete engine power to a PTO. However, you must modify your vehicle’s driveline to install such a split-shaft unit.
China Hot selling High Quality Speed Propeller Producing Design Boats Surface Drive Marine Stern Drive   pto shaft end yokeChina Hot selling High Quality Speed Propeller Producing Design Boats Surface Drive Marine Stern Drive   pto shaft end yoke
editor by CX 2023-05-19